Advantages of peripheral grinder

When using the peripheral grinder, be sure to carefully read the instructions and other relevant materials, and use the machine tool correctly. The machine tool operators and maintenance personnel shall have professional or corresponding professional knowledge of the machine tool, and operate the machine tool according to the safety operation rules and safety operation rules; Non professionals are not allowed to open the cabinet door. Before opening the cabinet door, make sure that the main power switch of the machine tool is turned off. Opening the cabinet door shall be operated by professional maintenance personnel for power maintenance;

Except for some system parameters and variable parameters, users are not allowed to modify other system parameters, spindle and servo parameters without authorization, otherwise equipment, workpieces and personal injuries will be caused to operators; After the parameters are modified, during * processing, the machine tool is locked and single process is used to confirm that the machine tool is in normal use and does not need to process the workpiece; The peripheral grinder programmable control program is designed by the machine tool manufacturer according to the requirements, and does not need to be modified. Improper use may damage the machine tool or even the operator. It is recommended that the machine run continuously for more than 24 hours. If the continuous operation time is too long, the accuracy of the machine tool will be affected; All connectors and joints of the machine tool. Do not plug or unplug the power plug, or serious consequences may occur.

Before the adjusted machining, input the program and start the CNC grinder left and right. The machine can automatically process continuously until the end of processing. Operators are mainly engaged in program input, editing, loading and unloading, preparation, processing state observation, parts inspection, etc., to reduce labor intensity and improve the intelligence of operators. In addition, the machine tool is usually closed, that is, clean and safe. With the ring grinder, the processing time can be accurately estimated in advance, and the standardization and modernization of fixture management can be realized. The information control adopts digital signal and standard coding, and the information is standardized. The combination of CNC machine tools and CAD/CAD system is the basis of modern integrated manufacturing technology.

It is the main part of the peripheral grinder. Because the grinding machine mainly processes steel, the magnetic characteristics of the magnetic disk can be used to firmly fix the workpiece on the disk without other complex clamping, thus greatly improving the "clamping" speed of the workpiece. Therefore, it is the main part of the grinder configuration. There are two kinds of disk surfaces. One is the permanent disk surface. As long as it is at the N and S poles, the function of suction and discharge can be realized. It is widely used. The disadvantage is that the suction is not large enough. It is usually used for small peripheral grinding machines. The other is the electric disc, which is a tool to convert electric energy into magnetic energy. It uses power on and power off to realize the function of tightening and loosening. Its suction is very large, and it is often used on large peripheral grinding machines. Its disadvantage is that when the power is suddenly cut off, the workpiece will fly up due to the inertia of the grinding wheel, and even the operator will be injured.

The sliding seat is a platform for horizontal reciprocating motion of the workpiece. It is also the power for grinding the workpiece. Whether it can move smoothly or not will directly affect the quality, flatness, straightness and dimension control accuracy of the machined surface. There are two kinds of power sliding seats for horizontal reciprocating motion. One is manual, which is driven by shaking the handle of the sliding seat. It is generally used for small peripheral grinder. The other is mobile type, which is driven by mechanical power and can perform automatic reciprocating motion and automatic longitudinal feed motion. It is usually used for large peripheral grinding machines.